PEPTIDECALCOpen Calculator

Retatrutide Reconstitution Calculator

Retatrutide dosage calculator: convert mg or mcg to U-100 syringe units after reconstitution.

Retatrutide Calculator

New to peptides? How to Use Peptides

1. Choose your syringe
Assumes U-100 markings (100 units = 1.0 mL). Math tool only — not medical advice.
2. Select peptide vial amount
3. How much bacteriostatic water are you adding?
4. Desired amount per draw
Your Results
To have a dose of — pull the syringe to —
Concentration
— —
Per Unit (U-100)
— mcg/unit
Draw
— units (— mL)
Syringe Max
— units
This calculator performs unit conversion math only and does not provide medical guidance. New to reconstitution? How to Use Peptides

What is Retatrutide?

Retatrutide is an investigational research peptide commonly described as a triple agonist, designed to interact with three hormone-related receptors: GLP-1, GIP, and glucagon. That multi-receptor design is the main reason it is grouped with other incretin-related peptides in metabolic science discussions.

Retatrutide is most often associated with topics such as metabolic health, glucose regulation, appetite response, and body-composition research. Conversations frequently contrast its three-receptor approach with semaglutide (typically one receptor pathway: GLP-1) and tirzepatide (typically two: GIP and GLP-1), even though these compounds are not interchangeable.

Like many peptides, Retatrutide is commonly supplied as a lyophilized (freeze-dried) powder and must be reconstituted with bacteriostatic water before it can be measured in a syringe. After reconstitution, a target amount in mg or mcg must be converted into the correct number of U-100 insulin syringe units.

That conversion depends on:

  • The total peptide amount in the vial (mg)
  • The volume of bacteriostatic water used for reconstitution (mL)
  • The desired amount in mg or mcg per draw

The retatrutide dosage calculator on this page performs that reconstitution math, so you can determine concentration, mcg (or mg) per syringe unit, and the exact draw volume in units and mL.

Use this page for mg/mcg → syringe-unit math after mixing. For sterile technique when adding bacteriostatic water, see how to reconstitute peptides.

Disclaimer: This page and calculator are intended for educational and mathematical unit-conversion purposes only and do not provide medical advice, diagnosis, or treatment guidance.

How to Use the Retatrutide Dosage Calculator

This retatrutide dosage calculator (also a retatrutide reconstitution calculator) converts vial milligrams and bacteriostatic water into concentration, then turns a target amount in mg or mcg into the correct number of U-100 insulin syringe units (and mL) after reconstitution. Educational unit-conversion math only — not dosing advice.

Step 1: Choose Your Syringe Size

Pick the U-100 insulin syringe size you have. U-100 means 100 units = 1 mL.

Step 2: Select the Vial Amount

Choose the milligram content of your Retatrutide vial (e.g., 5 mg, 10 mg, or 15 mg), or use Other for a custom amount.

Step 3: Enter Water Added

Enter the volume of bacteriostatic water you added when reconstituting. This sets the final concentration. For sterile mixing steps, see how to reconstitute peptides.

Step 4: Choose Your Amount

Select your desired amount in mg or mcg. The calculator shows concentration, amount per syringe unit, and the exact draw in units and mL.

Worked examples (educational math)

Assume a 10 mg vial reconstituted with 2 mL bacteriostatic water:

  • Concentration = 10 mg ÷ 2 mL = 5 mg/mL = 5000 mcg/mL
  • On a U-100 syringe, 100 units = 1 mL, so each unit = 50 mcg
  • 250 mcg on an insulin syringe = 250 ÷ 50 = 5 units (0.05 mL)

If you used 1 mL water instead, concentration becomes 10 mg/mL (100 mcg per unit), so the same 250 mcg amount becomes 2.5 units. Water volume changes units for the same mcg — always enter the volume you actually added.

Tip: Using less bacteriostatic water makes a stronger solution, so you need fewer syringe units for the same mcg amount. Educational unit conversion only — not dosing advice.

Retatrutide Calculator FAQs

What is a retatrutide dosage calculator?
A retatrutide dosage calculator converts vial milligrams, bacteriostatic water volume, and a target amount in mg or mcg into U-100 insulin syringe units and mL after reconstitution. It is educational unit-conversion math only — it does not recommend how much Retatrutide to use.
What is a retatrutide reconstitution calculator?
A retatrutide reconstitution calculator takes the mg labeled on the vial and the bacteriostatic water volume you mixed in, then converts a target mg or mcg amount into U-100 syringe units. For sterile mixing technique (wipes, wall injection, swirl), see how to reconstitute peptides.
How do I convert retatrutide dosage to units?
Concentration (mcg/mL) = total mcg in the vial ÷ water mL. mcg per U-100 unit = concentration ÷ 100. Syringe units to draw = desired mcg ÷ mcg per unit. The retatrutide dosage calculator on this page runs that conversion automatically.
How does water volume change syringe units?
More water lowers concentration, so the same mcg amount requires more syringe units. Example: a 10 mg vial with 2 mL water is 5000 mcg/mL (50 mcg per U-100 unit), so 250 mcg = 5 units. With 1 mL water, 250 mcg = 2.5 units. Always enter the water volume you actually added.
What does U-100 mean?
U-100 means the syringe is marked so that 100 units equals 1 mL. For example, 10 units = 0.1 mL and 50 units = 0.5 mL. Those marks measure volume — they are not Retatrutide mcg until you apply concentration math.
What is Retatrutide?
Retatrutide is an investigational research peptide of interest in metabolic science. It is commonly described as a triple agonist, meaning it is designed to interact with three hormone-related receptors: GLP-1, GIP, and glucagon. This page focuses on reconstitution unit-conversion math only.
How does Retatrutide relate to semaglutide and tirzepatide?
In research discussions, semaglutide is typically associated with one receptor pathway (GLP-1), tirzepatide with two (GIP and GLP-1), and retatrutide with three (GLP-1, GIP, and glucagon). That 1 vs 2 vs 3 receptor framing is why these compounds are so often compared side by side, even though they are not interchangeable.

Other Popular Peptide Calculators

General Peptide Dosage Calculator

Calculate concentration, units, and draw volume for any peptide after reconstitution.

BPC-157 Dosage Calculator

Convert BPC-157 doses from mcg to insulin syringe units after reconstitution.

Semaglutide Dosage Calculator

Convert semaglutide peptide doses to insulin syringe units after reconstitution.

Tirzepatide Dosage Calculator

Calculate tirzepatide peptide doses and syringe units based on reconstitution.

TB-500 Dosage Calculator

Convert TB-500 peptide doses from mg or mcg to insulin syringe units.

Ipamorelin Dosage Calculator

Convert ipamorelin peptide doses to insulin syringe units quickly.

MOTS-C Dosage Calculator

Calculate MOTS-C peptide doses and syringe units after reconstitution.

HGH Dosage Calculator

Convert HGH IU amounts to U-100 insulin syringe units after reconstitution.

NAD+ Dosage Calculator

Convert NAD+ doses into insulin syringe units based on dilution.

HCG Dosage Calculator

Convert HCG IU amounts to U-100 insulin syringe units after reconstitution.